www.scheppach.com
service@scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
20
GB
Legend of Fig. 1
1
Start button
2
Handle
3
Locking lever
4
Motor
5
Saw blade
6
Moving saw blade guard
7
Base
8
Table insert
9
Rotary table
10
Workpiece clamp
11
Housing / base joint
12
Dust bag
13
Stationary saw blade guard
HM80L
Scope of delivery
Mitre saw
Dust bag
Workpiece clamp
Tool for changing the
saw blade –
6mm Allen key
Tool for stop rail –
3mm Allen key
2 work piece supports
Support stand
2 batteries (AAA)
2 carbon brushes
Operating instructions
Technical Data
Dimensions
L x W x H mm
690 x 550 x 440
Rotary table ø mm
385 x 150
Table height mm
55
Saw blade Ø mm
210/30/2,6/1,6 WZ 24
Speed rpm
5000
Cutting speed m/s
55
Pivot range
2 x 45°
Tilt angle
45°
Double mitre 45° x 45°
left
Catch positions
45°, 30°, 22,5°, 15°, 0°,
15°, 22,5°, 30°, 45°
Weight kg
7,7
Cross-cutting data
Max. cut depth
90°/45°
60 / 35 mm
90°/90°
120 x 60 mm
90°/45°
80 x 60 mm
45°/90°
120 x 35 mm
45°/45°
80 x 35 mm
Drive
Motor V/Hz
220-240 / 50
Rated input W
S6 25%* 1500W
Technical changes reserved!
Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
•
Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
WE RECOMMEND:
Read through the complete text in the operating in
-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat
-
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re
-
duce downtimes and how to increase reliability and
service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula
-
tions that apply for the operation of the machine in
your country. Keep the operating instructions pack
-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture.
Read the instruction manual each time before op
-
erating the machine and carefully follow its informa
-
tion. The machine can only be operated by persons
who were instructed concerning the operation of the
machine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
In addition to the safety notes contained in the pre
-
sent operating instructions and the special regu
-
lations of your country, the generally recognized
technical rules for the operation of machines must be
observed.
Summary of Contents for HM80L
Page 185: ...185 ...
