www.scheppach.com
service@scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
20 І 64
Troubleshooting
Problem
Possible cause
Solution
The device does not
start.
a) The battery is flat.
b) The safety lock button (2) is faulty.
c) The motor is faulty.
d) The safety plug (14) is missing.
a) Check the battery. If required, arrange
repair by an authorised electrician.
b) Repair by an authorised service centre
c) Repair by an authorised service centre
d) Insert the safety plug (14).
The motor stops
during operation.
a) The battery is flat.
b) The battery is not inserted correctly.
c) The battery is faulty.
a) Charge the battery.
b) Re-insert the battery.
c) Clean the terminals, replace with an
original battery.
Decreased
performance
a) The battery is exhausted.
b) The battery is not fully charged.
c) The grass is too long.
a) Replace the battery.
b) Charge the battery.
c) Cut it in phases.
Excessive vibration
a) The blades are installed incorrectly.
b) Foreign object impeding the blades
c) The blades are damaged.
a) Check the blades' positioning.
b) Clean the blades.
c) Replace the blades.
Inadequate grass
intake
a) The grass box is full.
b) The ejection opening is obstructed.
c) The cutting height is set too low.
a) Empty the grass box.
b) Remove the grass.
c) Change the cutting height.
Lawn is cut
irregularly.
a) The blades are blunt.
b) The grass is too long.
a) Have the blades sharpened/replaced.
b) Cut it in phases.
