Scheppach plana 3.1c, Instruction Manual

Delivery contents

Planer

Cutterblock cover

Jointing fence

4 base plates

Hexagonal key SW 5

Operating instructions

Technical data

Subject to technical changes!

■

  NOISE LEVELS

Sound conduction level 

LWA according to EN ISO 

3744

106.2 dB(A)

Uncertainty K

3 dB(A)

Sound pressure level LpA 

according to EN ISO 11201 93.2 dB(A)
Uncertainty K

3 dB(A)

Note: 

The specified sound levels have been 

determined using a standardised test proce-

dure and can be used to compare different 

electronic devices. Furthermore, these values 

can be used to assess in advance the strain 

on the user caused by the sound.

Warning! 

Depending on how you use the po-

wer tool, the actual values can vary from those 

stated. Take measures to protect yourself 

from noise. Consider the entire work process, 

i.e. even times during which the power tool 

works without load or is switched off. Suitable 

measures include, amongst others, regular 

maintenance and care of the power tool and 

the attachments, regular breaks as well as 

good planning of the work processes.

The figures quoted are emission levels and 

are not necessarily safe working levels. Whilst 

there is a correlation between the emission 

and exposure levels, this cannot be used 

reliably to determine whether or not further 

precautions are required. Factors that

influence the actual level of exposure of the 

workforce include the characteristics of the 

work room, the other sources of noise, etc. i.e. 

the number of machines and other adjacent 

processes. Also the permissible exposure 

level can vary from country to country. This 

information, however, will enable the user of 

the machine to make a better evaluation of

the hazard and risk.

■

    STATEMENT CONCERNING DUST EMISSION

The values for dust emission measured 

according to the “Principles for testing dust 

emission (concentration parameters) from 

wood processing machines” created by 

the Technical Committee Wood, lie below 

2 mg/m3. That means a permanently safe 

compliance with the TRK threshold value for 

wood dust, applicable in the Federal Republic 

of Germany can be expected when the power 

tool is connected to an appropriate operational 

extraction unit with an air speed of at least 20 

m/s.

250

310

410

Dimensions L x W x H mm

1090x510x950

1605x630x960

1680x810x960

Table height mm

830

850

850

Jointer table L x W mm

525x256

780x320

820x420

Thicknessing table L x W mm

660x247

750x307

750x408

max. thickness height

180

220

230

Weight kg

176

292

334

Cutterblock

Ø 75x250

Ø 95x310

Ø 95x410

Cutterblock ø mm

Ø 73

Ø 93

Ø 93

Cutting circle ø mm

Ø 75

Ø 93

Ø 93

Revolutions max. 1/min

4000

4400

4400

Number of planing knives 

3

4

4

Planing knives

20x250x3

20x310x3

20x410x3

Feed speed m/min

5,5

6,5

6,5

Input power kW (230/400V)

2,3 / 2,3

2,5 / 2,5

3,2 / 3,6

Output power kW (230/400V)

1,7 / 1,9

2,0 / 2,1

2,4 / 2,9

Nominal current A (230/400V)

10,9 / 4,05

9,3 / 4,2

13,8 / 5,25

GB

15