Seite:15
Electrical connection
• Connect the machine with a CEE-plug to the power supply, provided supply should be 16 .
• Switch on the machine with the power switch, the motor runs up.
• Upon switching off the saw shaft is slowed down within 10 seconds.
Transport of the machine
To move the machine, take out the transport handle
(1) and to warrant a secure transport twist the handle
(2). ( Backup by screw head in transport handle)
Rocker lock
• To transport the rocker circular saw lock in
place the rocker lock in position (1).
1
Changing of rolling direction
The installed electrical motor is connected ready to operate. The connection
complies with the relevant VDE and DIN-regulations.
The power supplied by the
customer as well as the used extension cable should comply with these regulati-
ons resp. the local regulations.