12 І 72
www.scheppach.com
service@scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
•
Check the device and accessory parts for trans-
port damage.
•
If possible, store the packaging until the war-
ranty period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
Layout (Fig. 1)
1. ON / OFF switch
2. Potentiometer for adjusting the welding current
3. Welding current scale
4. Indicator lamp for operation
5. Warning lamp for overheating
6. Positive quick-lock coupling
7.
Negative quick-lock coupling
8. Power cable
9. Cable with electrode holder
10. Cable with ground terminal
11. Carrying strap
12. Combination wire brush with chipping hammer
13. Welding shield
14. Grip
Important information
Please read the directions for use carefully and
observe the information provided. It is important
to consult these instructions in order to acquaint
yourself with the machine, its proper use and safety
precautions.
Safety information
Please note
IMPORTANT
Use this equipment only for the purpose for which it
is designed, as described in these instructions.
Handling this system incorrectly may be hazardous
for persons, animals and property. The user of this
system is responsible for his/her own safety and for
the safety of others. Read these operating instruc-
tions and follow all the regulations.
•
Repairs and/or maintenance work must be left
strictly to qualified personnel.
•
Only the welding cables supplied with the equip-
ment and the accessories recommended by the
manufacturer are allowed to be used.
•
Ensure that the appliance is looked after prop-
erly.
•
To ensure that sufficient air can be drawn in
through the ventilation slits, the appliance
should not be constricted or placed next to a
wall while it is operating. Make sure that the
appliance is correctly connected to the mains
supply. Do not subject the mains lead to any
tensile stress. Unplug the appliance before you
change its position.
•
Check the condition of the welding cables, the
electrode tongs and the earth terminals; wear
on the insulation and the live parts may result in
dangerous conditions and reduce the quality of
the welding work.
Introduction
MANUFACTURER:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized ser-
vice technicians,
•
Installation and replacement of non-original
spare parts,
•
Application other than specified,
•
A breakdown of the electrical system that oc-
curs due to the non-compliance of the electric
regulations and VDE regulations 0100, DIN
57113 / VDE0113.
We recommend:
Read through the complete text in the operating
instructions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities
in accordance with the recommendations. The
operating instructions contain important information
on how to operate the machine safely, profession-
ally and economically, how to avoid danger, costly
repairs, reduce downtimes and how to increase reli-
ability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine
in your country. Keep the operating instructions
package with the machine at all times and store it in
a plastic cover to protect it from dirt and moisture.
Read the instruction manual each time before oper-
ating the machine and carefully follow its informa-
tion. The machine can only be operated by persons
who were instructed concerning the operation of the
machine and who are informed about the associated
dangers. The minimum age requirement must be
complied with. In addition to the safety requirements
in these operating instructions and your country’s
applicable regulations, you should observe the
generally recognized technical rules concerning the
operation of woodworking machines.
Unpacking
•
Open the packaging and remove the device
carefully.
•
Remove the packaging material as well as the
packaging and transport bracing (if available).
•
Check that the delivery is complete.
GB
