background image

1

2

3

4

7

CARE

boy  

OPERATING 

INSTRUCTIONS.

Please select the correct pads for cleaning 

( BLUE ) 

or care 

( GREEN )

 of your oiled / waxed wooden floor and fix them to 

your 

CARE

boy by using the velcro fastener . Use only original pads - these were specially designed for the optimum use on 

parquet floors .

When removing or changing used pads, turn off the power and take them off the velcro .  Wash cleaning and polishing 

pads immediately after use, so they are ready for the next application right away . You can wash them with up to 60 °C in 

your washing machine . For the next use put the new pads with the felt side on the velcro again .

Choose / change the right pads

Remove the rubber plug and fill the water tank with cleaning or care agent by means of the measuring cup . For the care 

of your oiled / waxed parquet floor, fill pure Scheucher 

PARQUET CARE 

into the tank . To clean your parquet floor, pour in 

diluted Scheucher 

PARQUET CLEANER

 accoring to the instructions . 

Close the plug and if necessary, clean excess quantities with an absorbent cloth . Make sure that the pump does not run 

dry . Therefore, pour some water into the tank after cleaning or waxing, clean the nozzle with with a few sprays of clear 

water and then empty the tank again!

Add water / detergent / waxing oil

Handling 

CARE

boy

If you slightly press the power switch using your foot, the LED lights will turn on and you can start using your 

CARE

boy . 

To turn off your 

CARE

boy, press the same button till LED lights turns off .  

CARE

boy is off now .

STAND-BY MODE

If you leave your 

CARE

boy in a standby mode for more than 10 minutes, it automatically switches into a sleep mode . 

Press the power switch twice now to reactivate it and continue your activity afterwards .

Power Switch ON / OFF

Press the start / stop button to start waxing / mopping . 

Press the spray button to spray water, detergent or waxing oil onto your floor .

REMARKS:

If you press the start / stop or the spraying button, the handle indicator light should light up in red . 

If this is not the case, please put some AAA batteries into the battery compartment and restart your 

CARE

boy .

START / STOP button, spray button

Summary of Contents for CAREboy











Reviews: