12
10.2 Switching from right or left rotation
1.
2.
1. Menü Press menu to adjust from right or left rotation
2. Turn the wheel to select the desired direction of rotation of the motor handpiece
The chuck can become detached when rotating to the left under high strain
10.3 Torque limitation
1.
2.
1. Menü Press menu to access the torque limitation function
2. Adjust the maximum torque by making a rotational motion on the wheel
10.4 Selection of Motor 1 and Motor 2
(Only with
Premium. For further information see point 12, page 15)
10.1 Switching on the wax knife
(in this respect, please note the recommendations on page 18 and the separate instruction sheet for the wax knife)
1. Menü Press menu for 2 seconds to switch to programming level
2. To activate the wax knife, set a value of 0 by turning the wheel
The heating can be adjusted within the range of 1 to 20
1.
2.
1. Menü Press menu to arrive at the motor selection function
2. Select motor 1 or Motor 2 by rotating the wheel
1.
2.
