4
B1051407 Rev. A
CDRPanX User Guide
This User Guide is one of two documents needed to install the CDRPanX system
completely. Before performing the procedures in this document, you or a qualified
service technician should complete the steps in the Installation Guide (B1051408).
All of the procedures for installing CDRPanX hardware may be found in your Installation
Guide. Procedures for installing the iPan Interface driver can be found in this User Guide
(
Section 3.3
).
Refer to
Figure 3
for the following references.
CDRPanX consists of the following principal parts. A Vertical Carriage
(1)
, to which the
power supply cord, Exposure switch, and digital imaging cable are connected, moves
vertically along the Column
(2)
, permitting adjustments for the height of the patient. A
Rotation unit
(3)
, consisting of a Control Panel
(4)
, Digital Image Sensor system
(5)
, and
X-ray Tube head
(6)
, is connected to the Vertical Carriage.
When positioning the patient for panoramic images, adjust the Rotation unit for patient
access, making the proper adjustments to ensure good panoramic images. (Additional
information on positioning may be found on
Table 3
and in
Section 6.2
.)
Figure 3. CDRPanX (Patient View)
1
2
5
6
3
4
