SCHICK - Milling Machine HZ 90
Index
1. Equipment and Parts Supplied
Accessories / Spare-Parts:
2. Technical Data
1. List of contents - accessories
2. Technical data
3. Operating
- control unit
- milling machine
- swivelling model table
4. Change of tools
5. Change of the chuck
6. Change of carbon brushes
Milling Machine HZ 90 complete 2005
Milling Machine HZ 90 2000
Control unit SM-HZ 2100
Connection cable 1m 2108
Foot-switch ( for electro-magnet ) 2110
Foot-switch ( for motor ) 4260
SM-Motor with cable and milling spundle (chuck 2,35mm) 4100/02
Milling dish 2060
Swivelling model table 2121
Key to change the chuck 4115
Counterstay wrench 4113
Surveying spindle 2052
Milling dish insert 4920
Milling carriage 2182
Light equipment 2002
Lamp 4740
SM-Motor with special cable 2107 4150/02
Milling spindle 4310/03
Chuck 2,35 mm 4114
Chuck 3,0 mm 4117
Chuck 1,6 mm 4116
Motor with handpiece and cable complete 4100
( can separatly be used with the control unit - see
instruction point 1.6 )
Power voltage 115 / 230 V. a.c.
Power frequency 50 / 60 Hz
Power consumption 80 W
Equipment protection built-in overload protection
Motor voltage at maximum speed 23,5 V d.c.
Speed of milling spindle 0 - 30.000 rpm,
infinitely variable
Height ( max./min. ) / Width / Depth 420/320 mm / 210 mm / 270 mm
Weight complete about 16 kgs net
1
