Schick SCHICK ceramic, Operating Instructions Manual

7. Care and maintenance

8. Technical Data

9

6. Troubleshooting

- If the delivery of the cooling agent is interrupted, check that there is a sufficient quantity

of the cooling agent in the reservoir and the feed from the foot switch (8) should be
checked for kinking.

- If there is a drop in the turbine output or speed, the pressure setting should be checked

at the station and the feed should be checked for sufficient compressed air.

- If there is a decrease in suction in the suction tub, check the amount of water in the

separator or filter of the extractor

Painted surfaces should be cleaned by wiping down with a dust- and lint free cloth. Do
not use aggressive cleaning agents as otherwise the painted surface can be damaged.
Gross dirt should be removed beforehand with a brush.

The water separator should likewise be cleaned with a cloth from the inside depending on
use.This serves particularly to prevent the development of odors and bacterial growth in the
container.

After emptying and/or cleaning the water separator ensure that the arrow visible
on the lid points to the hose port attached to the side of the separator (see pic. 2 page 4)

Caution:

8. Technical Data

separator art.-no. 2655

LxWxH:                           45x45x50cm
Weight:                           4,9kg
Adaptor port:                  internal Ø31,4mm

external  Ø37,1mm

Hose:
Hose length:                   2 x 4m
Weight incl. adaptor       2,0kg
Hose port:                      internal Ø32,7mm

external Ø40mm

suction tub art.-no. 2470

LxWxH:                       30x24,5x12,5cm
Weigth:                        1,3kg
Connection:                 31mm -
38,1mm

(Conical)