B1051039 Rev. B
USBCam
4
PLEASE NOTE: When selecting the mounting option for your USBCam, choose a location
that offers easy access during patient exams and safe storage afterwards. In most
practices, mounting the USBCam to the dental chair will provide the best all-around
solution.
2.2.1. Dental Chair-Mounting Option
To install the handpiece holder to a dental chair, do the following:
1.
Remove the handpiece from its holder before performing this procedure.
2.
Position the holder on the instrument rail of your dental chair, using the cutout space
on the back of the holder as a guide.
3.
When the holder is in position, use an Allen key to tighten 2 set screws located at the
bottom of the cutout block.
2.2.2. Wall-Mounting Option (with Fasteners)
To install the handpiece by fastening it to a wall or other vertical surface, do the following:
1.
Remove the handpiece from its holder before performing this procedure.
2.
Remove the cutout block from the handpiece holder by loosening 2 flat-head Phillips
screws.
3.
Position the holder on a smooth stable vertical surface. Using the holes on the back of
the holder as guides, fasten the holder securely to the wall using 2 (#6 x 3/4) dry wall
screws (not supplied) or other hardware appropriate to the mounting surface.
2.2.3. Wall-Mounting Option (with Adhesive)
To install the handpiece by attaching it with adhesive tape to a wall or other vertical
surface, do the following:
1.
Remove the handpiece from its holder before performing this procedure.
2.
Remove the cutout block from the handpiece holder by loosening 2 flat-head Phillips
screws.
3.
Cut and trim a piece of double-sided adhesive tape (not supplied) to the size of the
back of the holder. Remove one side of the tape and attach it to the holder.
4.
When the holder is correctly located, remove the other side of the adhesive tape and
fasten the holder securely to the wall or other surface.
