B1051061 Rev. A
USBCam2 User Guide
12
3. Operation
3.1. Operating the Camera
Refer to the following sections for instructions on turning the
USBCam2 on and off, taking still images from streaming live video
("freeze-frame" capture), and the use of the Auto Advance feature.
3.1.1. Turning the Camera On
Before turning on the camera make sure the cable connections are
secured. Turn on the camera by clicking the Power On/Off button
(Figure 7, item 2
).
Removing the handpiece from its holder also
turns the camera on.
3.1.2. Turning the Camera Off
When the camera's light is on, clicking the camera’s Power On/Off
button (Figure 7, item 2
)
shuts power off to the camera. Clicking the
Power On/Off button restores power to camera and turns the LEDs
back on.
When not in use, store the camera in its holder to protect the device
and for easy access. Placing the camera in its holder turns off the
camera automatically.
NOTE: The camera turns off automatically after 5 minutes of continuous use.
