Instruction Guide
ICID Double Wall Adjustable Starter Section
Schiedel Chimney Systems Ltd.
Crowther Estate
Washington
Tyne & Wear NE38 0AQ
Tel. 0191 4161150
Follow SchiedelUK
Visit our website:
Schiedel.co.uk
INITIAL INSTALLATION
1. Remove loose strip of insulation and keep to one side.
2. Insert male spigot of liner into the appliance spigot.
3. Seal using the rope gasket, fire cement or similar.
4. Insulate liner using strip of insulation with joint to rear.
Width of insulation strip can be trimmed to suit.
5. Slide adjustable case down over the insulation to cover the
appliance spigot.
Please see reverse side of this guide for instructions to allow
removal of stove for servicing and re-installation of stove.
