Magnetic Drilling Machine
Operating Manual
7. Once the tapping is done, stop the machine and shift tapping button to the
left (see figure) and start the machine. Spindle of the machine will
automatically reverse to its starting position. Use the handles to take adaptor
with tap completely out from the work piece.
How can you use the machine for Reaming/Counter-sinking?
2. In this process, always observe the limitations stated in the technical data for
the tools to be made use of.
6. Now bring the machine lever down toward the drilled hole. Once the
machine makes one rotation with the tap it will automatically cut the thread
in the hole as per required length.
5.5 REAMING/COUNTER-SINKING
5. Shift tapping button to the right
1. You can make use of the machine for the process of Reaming or Counter-
sinking too, considering the machine's wide range of speed availability to
operate.
0
L
R
0
L
R
SWC 120 WT
14
