Magnetic Drilling Machine
Operating Manual
d. The connecting nipple has gotten clogged. Do a deep cleaning of the tank and the
nipple.
Contact the Customer Service immediately if the steps and remedies described above do
not solve your problem.
c. The torque cut-off has been triggered. You just have to switch the machine off for a
few seconds and then switch it on.
a. The plug isn't properly inserted into the socket. Just re-insert the plug.
b. The Circuit Breaker has gotten switched off by accident. Switch it on.
d. You have missed selecting the direction of rotation. Click on select.
e. You haven't switched on the magnetic clamp. Switch it on.
f.
The machine has gotten over-heated because of which the internal safety switch of
the machine is switching it off. Let the machine cool down for some time and then
switch it on.
2. If the type of error that you face revolves around the Circuit Breaker tripping in the
power distributor, following can be the possible causes along with the remedies:
a. The machine has some defective parts. Immediately contact the Customer Service.
b. Plenty of appliances have been connected to the same power circuit, resulting in the
tripping. Unplug a few of those appliances.
3. If the type of error that you face revolves around the Magnetic clamp not functioning
to its best capability, following can be the possible causes along with the remedies:
a. You have not switched on the magnet. Switch it on.
If the type of error that you face revolves around the Lubrication system not
functioning to its best capability or failing to function at all, following can be the
possible causes along with the remedies:
1. If the type of error that you face revolves around the Motor not starting even after
pressing the ON/OFF button or the motor tends to stop while it is functioning, following
can be the possible causes along with the remedies:
b. The surface where the machine is placed is not magnetic enough. Change the
placement and use a suitable base.
c. The lubricant is over. Pour the required amount of lubricant into the machine.
e. The lubricant tap is jammed or has gotten closed. Open the tap.
TROUBLESHOOTING
SWC 120 WT
20
