AUGERS AND FAN SHEAR BOLT REPLACEMENT
Shear bolts are to be considered a preventive measure and not an assured protection. Operator vigi-
lance is required. Thoroughly inspect the areas where the snowblower is to be used and remove all
foreign objects.
To avoid damage to the snowblower:
Use only the original shear bolts (grooved bolts).
#4165806 in bags of 10 for the augers.
#4165812 in bags of 10 for the fan.
The use of any other shear bolt will not insure any protection and may void the warranty.
IMPORTANT:
I
T IS VERY IMPORTANT TO REPLACE THE AUGERS IN THE SAME POSITION AS SHOWN
IN THE DRAWING BEFORE INSTALLING THE SHEAR BOLTS. ONE SIDE AUGER SHOULD BE OPPO-
SITE OF THE OTHER SIDE.
END OF SEASON STORAGE
- Clean snowblower and subframe thoroughly and repaint all parts from which paint has
worn.
- List the replacement parts that will be needed for the next season.
- Store the snowblower and the subframe in a dry place.
- Follow the instructions in the Lubrication section.
13
SERVICE
Summary of Contents for 75-70666
Page 2: ...2 ...
Page 19: ...PARTS SECTION PARTS SECTION 17 ...
Page 20: ...PARTS BREAKDOWN SB448 SNOWBLOWER 18 ...