9
430
MAX
ASSEMBLY / SPECIFICATIONS
ASSEMBLY INSTRUCTIONS
1. Remove unit and all parts from crate.
2. Install the wheels with valve stems facing
outward and traction bar tread facing in the
proper direction. There are two right wheels and
two left wheels. Tighten wheel nuts to 85 ft. lbs.
Adjust tire pressures. Refer to Service Schedule
on page 17.
3. Install the seat (if removed) and connect the
wiring for the seat switch.
4. Install the steering wheel (if removed) and torque
the nut to 40 ft. lbs. Snap the center cover in
place.
5. Check all fluid levels. Refer to Service Schedule
on page 17.
6. Visually inspect for loose bolts or fittings.
7. Start the unit and test drive to check all functions.
8. Before driving the machine without attachment,
remove counterweight.
SPECIFICATIONS
Specifications are subject to change without notice.
Engine:
75-70006B ............. Kubota WG752-E Gas
25
HP
liquid-cooled
75-70008B ............. Kubota D722-E Diesel
21
HP
liquid-cooled
75-70010B...............Generac GTH 990
33
HP
air-cooled
75-70011B............... Kohler CH750 Gas
30HP
air-cooled
Drive Train:
Transmission ................. Sundstrand Hydrostatic
Series
15
Pump
and 2 motors
Transaxles....................... Peerless 2500 Series
2-speed
Steering ......................Hydraulic power steering
Parking Brake .................................. Disc type
Fuel System:
Tank capacity ................... 6 Gallons
Fuel Pump ........................ Diaphragm(Generac &
Kohler)
Electric
(Kubota)
Electrical:
Starting ................................ 12 volt, Key switch
Battery ................................. 12 volt, Group 26
Tires:
Traction Type ................ 21 x 11.00-8, Rawhide
Turf Type, optional ........ 20 x 10.00-8, Turfmate
Dimensions:
Overall Width ................................... 44"
Overall Length .................................. 64"
Overall Height .................................. 49"
Wheelbase ....................................... 38"
Inside Turning Radius ...................... 46"
Weight (Kohler & Generac) .............. 1000 lbs.
Weight (Kubota) ............................... 1100 lbs.
Speeds:
Forward:
(Traction Type Tires) ..... 0-8.5 MPH (high range)
0-4.4 MPH (low range)
Reverse
(Traction Type Tires) ..... 0-5.3 MPH (high range)
0-2.8 MPH (low range)
The Schiller Grounds Care, Inc. 430 MAX is designed for the commercial user or homeowner. From the rugged in-
dustrial frame to the operator controls...the tractor is ready for demanding turf and grounds care assignments.
Power steering and articulated frame, combined with a low center of gravity and high flotation tires, provide
exceptional maneuverability. Fully hydrostatic, infinitely variable, single lever control lets you choose travel
speeds to match the task. No clutching, jerking or braking, just smooth power flow to the 4 full time drive wheels
for added traction in tough areas.
Front mounted attachments offer a wide range of working tools. All of them attach to the “Quick Hitch” that is a
Schiller Grounds Care, Inc. exclusive. The front hitch is standardized for all models of Schiller Grounds Care,
Inc. power units so your present attachments are not obsolete.
You can do many tasks with this one tractor, compared to higher priced single purpose machines, by simply
changing attachments in less than 2 minutes. Operator safety and comfort, power, performance and depend-
ability will provide years of enjoyment with your Schiller Grounds Care, Inc. tractor.
