17
430
MAX
SERVICE CHARTS
SERVICE CHART
DAILY
EVERY
25
HOURS
EVERY
50
HOURS
EVERY
100
HOURS
EVERY
250
HOURS
Read safety decals.
X
Check fuel level.
X
Check engine oil level.
X
Check coolant level. (Liquid cooled engines only)
X
Visual inspection of:
Bolts and fittings for signs of loosening.
X
Accumulation of dirt or foreign matter around engine, restricting engine cooling.
X
Oil leaks or hydraulic hoses, belts, electrical wiring, showing signs of wear.
X
Tires for low pressure or signs of abnormal wear.
X
Change engine oil and filter:
Kohler engine: Initial change at 5 hours
Genreac engine: Initial change at 8 hours
Kubota engine: Initial change at 35hours
Refer to the engine manufacturer's manual for
oil and filter change intervals after initial change.
Check air cleaner:
Clean or replace.
X
Check battery water level:
If battery is serviceable, fill to cover the plates 1/4".
X
Transaxles:
Check transaxle oil level.
X
X
Use only Steiner Trans-Hydraulic oil or Texas Refinery Corp. 6440 Universal Torque
Fluid. Do not use automatic transmission fluid or motor oil.
Initial hydraulic oil and filter change at 25 hours.
Change hydraulic oil and filter every 250 hours, or annually (whichever occurs first).
X
Replace hydraulic oil and filter every 250 hours, or at the first sign of abnormal hydraulic
function.
X
Fuel system:
Check or replace filter.
X
Lubrication:
Grease PTO slider bracket pivot, saddle, and rod.
X
Use chain lube, WD-40 or light motor oil on all pivot points, hood hinges, tie rod ends,
center link, etc.
X
Grease drive shaft U-joints, centerpivot and PTO idler arm
X
Check tire pressure:
Air Pressure- 5 to 8 lbs. (Duals 3 to 4 lbs.)
Outside Duals should have nomore than 50% of the inner tire pressure
X
Storage:
Drain fuel tank.
Maintain proper tire pressure.
Remove battery and maintain charge.
Grease exposed cylinder shafts.
