Operation
©
by Antriebs- & Regeltechnik Schimpf GmbH
57
+ -
The current 4 mA value is output. The displayed
value must be set to 4 mA as accurately as
possible. The value can be decreased using the
button and increased using the
button.
Wait until the value is stable.
Press and hold the “Prog” button to set the value.
The “Prog” LED will flash briefly.
+ -
The current 20 mA value is output. The displayed
value must be set to 20 mA as accurately as
possible. The value can be decreased using the
button and increased using the
button.
Wait until the value is stable.
Press and hold the “Prog” button to store the new
calibration values for 4 and 20 mA in the memory.
The “Prog” LED will flash briefly.