MVPHD-24 Operations Manual Version 0.9.0 page 35 of 74
October 26, 2020
Active Buttons
There are six active buttons which are located to the right of the ten category buttons. They are used to turn
on and off effects, test signals, color temperature, monochrome, go to black, and the chassis fan. When an
active button is pressed alone, it activates or de-activates the named function. Upon activation, the button
will illuminate red.
Figure 3-4. Hold Down Menu Enable Button to Access Active Button Control Menus.
Control menus are available to configure each of the active buttons. To access the control menus for an active
button, press the MENU ENABLE (also labeled PREV) button down and continue holding it down when
pressing the desired active button. A control menu should appear on the front panel display for the selected
button. Release the MENU ENABLE button once the control menu appears. While the menu mode is active,
the button will illuminate yellow, or flash between red and yellow if that function is also active.
Note, the active buttons will not activate (turn on or off) while the MENU ENABLE button is being held down.
Pressing NEXT or PREV (previous) will step through all the control menus available for that button.