25
Secondary functions of the keys
Function
Key
To confirm the selected menu
To change the menu and active digit
To move the active digit to right
To move the active digit to left
To enter into the menu
Escape from the menu to normal operation
Press
and
keys at the same time during normal weighing to switch “Animal weighing” on
or off. When the weight stabilises in “Animal weighing mode”, a beep sounds twice.
Hold the
key down to activate parts counting.
Press
and
to clear the memory.
3. Basic operation
3.1 Resetting the display
The indicator can be reset at any time by pressing the
key at the point from which you wish to
continue weighing or counting, within the pre-set limit. This is usually necessary only when the platform
is empty. When zero is reached, the display shows 0.
The weigher has an automatic reset, for example when a very small plus or minus weight difference
occurs. However, it may be necessary to reset manually by pressing the
key if a low weight is
displayed while the platform is empty.
3.2 Tare
Reset the scale to zero by pressing the
key if necessary. The ZERO indicator appears.
Summary of Contents for 4309606
Page 2: ...2 ...
Page 33: ...33 Pr 2 Send data to print and accumulation ...
Page 64: ...64 beschädigt ...
Page 128: ...128 ...