27
Press
key to confirm, display will show “set l”.
Enter the low limit value by using
and
keys to change the active digits and press
key to increment the value.
Press
key to confirm.
To escape from the settings, press
key.
4.3 Set Check Weighing
Press
and
key together, display will show “set h”.
Press
key to select beep.
Press
key to confirm, display will show no or ok or ng
Check mode no: No beep sounds in the limits. Function turned off.
Check mode ok: When the weight is within the limits, OK will be shown and beep will sound.
Check mode ng: When the weight is outside the limits, the beep will sound and OK will be shown.
4.4 Note
Note: Check weighing is available only if weight is more than 20 units.
To switch off check weighing, enter 0 for both limits by pressing the
key. While the current limits
are displayed, press
to enter these zero values.
5. Accumulation
5.1 Note
The scale can be set to accumulate manually by pressing the
key. For settings, see the parameter
p 2 Com » mode » pr 2
Before operation, the scale should be stable and zeroed. Accumulation is available only if weight is
more than 20 units.
Summary of Contents for 4309606
Page 2: ...2 ...
Page 33: ...33 Pr 2 Send data to print and accumulation ...
Page 64: ...64 beschädigt ...
Page 128: ...128 ...
