16 • Schlage • AD-200 user guide
Batteries
To install or replace batteries
L
Replacement of batteries does not affect any programmed data.
L
Battery voltage can be checked with the SUS.
1. Remove the battery cover.
2. Remove the battery bracket.
Do not allow the battery pack to hang from the wires.
3. Install the new batteries (install only new AA Alkaline batteries).
4. Reinstall the battery pack and battery bracket.
5. Reinstall the battery cover.
Be careful not to pinch the battery wires when installing
the battery cover.
CAUTION! Danger of explosion if battery is incorrectly replaced! Replace only with the
same or equivalent type. Dispose of used batteries according to the manufacturer’s
instructions.
Four Battery Configuration
Eight Battery Configuration
This product has been evaluated for ULC-S319 compliance with AA and coin cell batteries
listed below. For installations requiring ULC-S319, these battery models should be used.
AA batteries: Duracell PC1500, MN1500; Energizer E91, EN91, AX91, XR91;
RayoVac 815, 815-HE
Coin cell batteries: Energizer CR2025, CR2032; Maxell CR2025, CR2032,
Panasonic CR2025, CR2032; RayoVac KECR2025, KECR2032.
