CM5100 COMPUTER MANAGED CYLINDRICAL LOCK
HARD-WIRED (FSE/FSA) INSTALLATION MANUAL
CM5100-FSA-KPI
CM5100-FSE-KPI
CM5100-FSA-IBO
CM5100-FSE-IBO
CM5100-FSA-MGK
CM5100-FSE-MGK
CM5100-FSA-MGI
CM5100-FSE-MGI
CM5100-FSA-PXI
CM5100-FSE-PXI
PRO5100-FSA
PRO5100-FSE
CM5100-FSA-PXK
CM5100-FSE-PXK
The 5100 series lock is a stand-alone, microprocessor controlled, electro-
mechanical locking system. The 5100 employs a heavy-duty mechanical
design which is easy to install and highly reliable. The FSE and FSA sole-
noid-driven models are hard-wired to a 12 or 24 volt (AC or DC) power
supply. They offer fail secure and fail safe operation,
respectively.Operationally, the outside lever is normally locked and the
inside lever is always free to allow egress. Electronic access control is
achieved by entering an ”Access Credential” (magnetic stripe card, code,
iButton Key, or HID Prox fob or card). Electronic access control capabilities
are listed below by model. All models are designed to accommodate an
emergency mechanical key override. Standard features of the CM models
include up to 1000 user memory, real time features including time zones
and holidays, and audit trail of up to 1000 events. Optional ATK (audit trail
- key override) will note any use of the mechanical key on the audit trail
report. Manual and computer programming is supported by all models
which have a keypad. The PRO models are manually programmed to
accept up to 100 codes.
Functions:
5190:
Office Function - has “Lock” and “Unlock” buttons on inside
escutcheon - function not available on PRO
5195:
Dormitory/Privacy Function - Pushing the “PRIVACY ON” button on
the inside escutcheon places lock in the “Privacy” mode: a “Lockout” cre-
dential or mechanical key is required to enter. Condition is cleared when
the door is opened. Function not available on PRO
5196:
Storeroom/Classroom Function - can be unlocked by “toggle” cre-
dential and relocked again by same. See programming guide for more
information.
Models:
FSA:
Solenoid operated clutch - fail safe
FSE:
Solenoid operated clutch - fail secure
KPI:
iButton reader and keypad
IBO:
iButton reader only
MGK:
Magnetic stripe card reader, iButton reader and keypad
MGI:
Magnetic stripe card reader and iButton reader
PXK:
Prox card reader, iButton reader, and keypad
PXI:
Prox card reader and iButton reader
PRO:
Keypad only - no computer programming, 100 code memory
Options:
ATK:
Audit trail of mechanical key use (not available on PRO)
HSS:
High security screws on inside escutcheon
SLB:
2-3/4” backset, 1/2” latch bolt
OLB:
2-3/8” backset, 1/2” latch bolt
ELB:
2-3/4” backset, 3/4” latch bolt
T3:
Track 3 card reader (data on track 3 must be ABA track 2 format)
- MGI/MGK only
KD:
Keyed Different, includes Schlage Everest cylinder
LC:
Less Cylinder
5100 CYLINDRICAL
LOCKSET - STANDARD
Form 51116-C
