KC9232/KC9232-2 & KC9233/KC9233-2 INSTALLATION
Installing the KC9232/KC9232-2 or KC9233/KC9233-2
57041-D Page 15 04-11-2007
20) Apply the Exterior Gasket:
21) Place Trim On Door:
22) Tighten Top Mounting Screw:
•
Apply gasket to back of trim.
•
With key in cylinder, turn key counterclockwise until
it stops.
•
Line up parts for proper engagement.
•
Carefully slide trim against door.
NOTE: Turning the key will make a part inside the trim
move, allowing access to the upper mounting and battery
cover screws in the next step. It must remain in this position
to continue with the installation. When the key is turned
back and removed, the part inside the trim will again restrict
access to the upper mounting and battery cover screws.
•
Using a ball-end, 1/8” Allen wrench,
partially
tighten
the top screw in trim.
NOTE: Do not completely tighten the top screw. Leave loose.
a