KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
57040-E Page 13 04-2007
16) Verifying the Interface Hand:
Verify the Interface Hand (continued):
If the hook on your interface has to be reversed, continue with,
Remove Retaining Ring: on
page 13.
Otherwise, skip to,
Orientation of the Interface: on page 18.
17) Remove Retaining Ring:
•
Photo on right shows how your interface should look for a
RHR installation. Note direction of hook (
a
) in respect to
latch (
b
).
NOTE: Hook can be reversed.
b
a
•
Photo on right shows how the assembled interface should
look for a LHR installation. Note direction of hook (
a
) in
respect to latch (
b
).
NOTE: Hook can be reversed.
b
a
•
Using a small, flat blade screwdriver, pry off retaining ring
(
a
) from interface (
b
).
NOTE: Do not discard retaining ring.
a
b
