KC9116/KC9116-2 & KC9326/KC9326-2 INSTALLATION
Installing the KC9116/KC9116-2 or KC9326/KC9326-2
57044-C Page 18 04-2007
30) Drill & Tap the Holes:
31) Insert & Position Actuator Plate:
32) Tighten Actuator Screw:
•
Drill and tap the holes in step:
Mark Drill Points For the 10-32
Holes: on page 17
.
•
With 10-24 screw inserted in actuator plate, hold screw in place with
screwdriver.
•
Carefully insert actuator plate into prep.
•
Position rod actuator.
•
Fully tighten the screw in the actuator plate.