2
S E R I E S
L
Performance Features
Exceeds ANSI A156.13 Grade 1 lever torque requirements.
Exceeds 800,000 cycle ANSI Grade 1 requirements.
Grade 1 security with concealed mortise cylinder.
Grade 2 security with full face mortise cylinder.
U.L. Listed for all functions except L9076 and L9077 for 3-hour doors, single fire-rated doors
not exceeding four feet in width and ten feet in height.
Universal lock chassis, one lock case for knobs or levers.
Replaceable breakaway spindle is designed to resist excessive force from vandalism,
preventing damage to lever trim and internal lock case components.
Solid stainless steel 1
¹⁄₂
(38mm) deadbolt, 1
(25mm) projected.
Heavy duty
³⁄₄
(19mm) latchbolt with anti-friction tongue standard.
Hand is quickly reversible without opening lock case.
Door Preparation
Deeper cylinder retainer groove
in cylinder shell increases security
against wrenching and pullout.
All cylinders backward compatible.
High strength steel alloy
cylinder retainer
Armor front
Brass, bronze or
stainless steel
Adjustable for door bevel
1” (25mm) throw
deadbolt
Stainless steel
Captured cylinder
set screw for easier
cylinder mounting
Non-handed
auxiliary latch
Full 3/4” (19mm)
latchbolt
Standard
Heavy duty
anti-friction tongue
Standard
Fusible link built into lockcase
Standard
Stopworks operates
by thumbturn.
Steel case and parts
corrosion protected
Trim applied by threaded bushing
No exposed screws
Cutaway View
See templates.
Note:
L-Series mortise locks meet
all requirements for installation
in doors and frames prepared in
accordance with ANSI 115.1.
6 Pin Everest Cylinder with
patented keys standard
