Allegion Connect
The L909X/L949X-Series and LM929X-Series electrified mortise locks are furnished with Allegion Connect, a factory-installed Molex
®
connector
system that provides simplified installation and maintenance. The system utilizes quick-connect harnesses and hinges. As an alternative installation
method, the Molex connector may be cut off and the lock installed with traditional wire splicing methods OR by using a 6” wiring harness (included) if
additional wire length is needed.
Note: The items listed and shown below reflect options that may or may not be included with your specific model. See charts below for wire colors.
L909X/L949X available options:
RX Request to exit
DM Deadbolt monitor
DPS Door position sensor
LX Latchbolt monitor
LM929X available options:
None
Variable length wiring
harness (6" to 192")
EPT or electrified hinge
6” wiring harness
To
power
supply
RX/LX/DPS
RX/LX/DM
1 2
3 4
5 6
7 8
1 2
3 4
4-pin
connector
1 2
3 4
5 6
7 8
1 2
3 4
8-pin
connector
8-Pin
Lock
Connector
Harness
Connector
Purpose
Function
Wire
Color Pin
Pin
Wire
Color
EL / EU
Power*
Black
1
▬►
1
Red
Power*
Black
2
▬►
2
Black
RX
Normally Open (NO)
Blue
3
▬►
3
Blue
Normally Closed (NC)
Yellow
4
▬►
4
Yellow
Common (C)
Green
5
▬►
5
Green
LX
Normally Open (NO)
Gray
6
▬►
6
Gray
Normally Closed (NC)
Violet
7
▬►
7
Violet
Common (C)
White
8
▬►
8
White
* Lock auto-detects GND, +12 or +24 V DC
4-Pin
Lock
Connector
Harness
Connector
Purpose
Function
Wire
Color
Pin
Pin
Wire
Color
DM
Normally Open (NO)
Orange
1
▬►
1
Orange
Normally Closed (NC)
Brown
2
▬►
2
Brown
Common (C)
Pink
3
▬►
3
Pink
not used
4
4
Tan
DPS
Normally Open (NO) Green/black
1
▬►
1
Orange
Normally Closed (NC)
Red
2
▬►
2
Brown
Common (C)
White/black
3
▬►
3
Pink
not used
4
4
Tan
