Powering on the Alarm
To turn on the alarm:
• Insert two AAA batteries
• Push the Schlage button for 5 seconds
The alarm is activated when a light flashes
around the Schlage button.
Important:
The alarm has been pre-set
to the Forced Entry setting and is ready to
use. If you wish to switch to another alert
setting (three options: Activity, Tamper
and Forced Entry), turn to page four for
instructions. The different alert settings
are explained on pages 6-8.
Powering off the Alarm
To turn the product completely off:
• Push the Schlage button until you see the
second LED flash – then let go
• The alarm functionality is now completely
turned off. You can verify this by quickly
pushing the Schlage button – there should
be no light or beep when you push the
button.
TIP:
Not sure your alarm is activated?
Simply press the Schlage button and it will
beep and light up to confirm it is activated.
If it does not, confirm new batteries are
installed properly. Then press the Schlage
button for 5 seconds (until it beeps) to power
on the alarm.
5
Summary of Contents for Lock with Built-in Alarm
Page 15: ...GUÍA DEL USUARIO Cerradura con alarma incorporada 15 ...
Page 29: ...GUIDE DE L UTILISATEUR Serrure avec alarme intégrée 29 ...
Page 42: ...42 ...
Page 43: ...43 ...