Ⅱ. Basic function
12
Safety handle
function
Set-up
Set-up
Cancel
Cancel
The safety handle function may be set up from both outside and inside, and is
automatically cancelled when the registered PIN code or card is validated from
the outside. Safety handle function can only be cancelled temporarily from inside.
C
8
Touch the
front pad
Touch the
front pad
Touch the
front pad
Card key
#
[
#
] Button
[ ] Button
#
[
#
] Button
[ ] Button
[8
] Button
PIN code
PIN code
or
If the door opened and closed
again within seven seconds, safety
handle is activated
[Method 2] Temporary release
[Method 1] Emergency release
Push to the right [
manual safety
handle switch
]
C
Card key
1. How to set the safety handle function from outside
2. How to set the safety handle function from inside/ how to release
1. Auto-locking function
2. Auto-relocking function
How to set double locking function
Auto-locking function/auto-relocking function
Cancel
Set-up
Press [
double lock
] button for
3 second
Press [
manual-locking
] button
When the door is closed,
it will be locked automatically.
If the door is not opened within
seven seconds
after the PIN code, card key or fingerprint is
validated, it will be re-locked automatically.
Hold in [
OPEN
] position by pulling
up jog button for three seconds. Safety
handle will be released temporarily
Hold in [
CLOSE
] position by pulling down
jog button
for five seconds
