3
ENGLISH
Let’s get started!
Once you have all your tools together, please follow each step carefully and in order.
Because this is an electronic lock, the order of steps is very important. If you skip a step,
you may have to perform a factory default reset and start over.
You will definitely need this tool:
•
Phillips screwdriver
You can use a manual or electric
screwdriver, but please
DO NOT
use a
power drill!
You may also need these tools:
•
Tape Measure
•
Flathead Screwdriver
•
Pencil
•
Wood Block
•
Hammer
INSTALLATION NOTES! PLEASE READ!
•
DO NOT
use a power drill for installation! This could damage the lock.
•
Please read all the instructions before calling customer support.
•
DO NOT
install the batteries before installing the lock! Follow the instructions in
order!
•
If you have previously installed this lock on another door, you
MUST
perform a
Factory Default Reset
FIRST
! See the
User Guide
for more information.
•
This lock is designed for the following operating temperatures:
•
Outside Lock Body (exterior mounted): -31˚F (-35˚C) to 151˚F (66˚C)
•
Inside Lock Body (interior mounted): 14˚F (-10˚C) to 120˚F (49˚C)
Steps at a Glance
1 Download the app. ................................................................................................................ 4
2 Watch the installation video. ................................................................................................. 4
3 Check current door/frame alignment. .................................................................................. 4
4 Remove the current deadbolt from the door. ...................................................................... 4
5 Check door/frame dimensions.............................................................................................. 5
6 Locate programming and access codes. ............................................................................. 5
7 Install bolt and strike. ............................................................................................................. 6
7a Adjust bolt length, if necessary. ..................................................................................... 6
7b Change the faceplate, if necessary. ............................................................................... 6
7c Install the bolt into the door. ......................................................................................... 7
7d Install the strike into the frame. ..................................................................................... 7
7e Test bolt alignment. ........................................................................................................ 8
8 Install the Touchscreen Assembly. ........................................................................................ 8
8a Install the Touchscreen on the outside of the door. .................................................... 8
8b Install the Support Plate on the inside of the door. ..................................................... 9
9 Install the Alarm Assembly..................................................................................................... 9
9a Remove the battery cover from the Alarm Assembly. ................................................. 9
9b Connect the cable to the Alarm Assembly. ................................................................ 10
9c Install the Alarm Assembly. .......................................................................................... 10
9d Secure the Alarm Assembly to the Support Plate. ..................................................... 11
10 Install the Batteries. .............................................................................................................. 11
10a Install the batteries into the battery tray. .................................................................... 11
10b Install the battery cover. ............................................................................................... 12
11 Set up the Lock. .................................................................................................................... 12
12 Test the Lock. ........................................................................................................................ 12
12a Extend the bolt (lock) using the inside thumbturn. ................................................... 12
12b Extend the bolt (lock) using the Touchscreen. ........................................................... 13
12c Retract the bolt (unlock) using the Touchscreen. ....................................................... 13
12d If the lock failed to lock or unlock: .............................................................................. 13
13 Continue to the User Guide. ............................................................................................... 15
Summary of Contents for SENSE
Page 16: ......
Page 17: ...Guía de instalación CERRADURA INTELIGENTE ...
Page 32: ......
