Schlage TouchScreen Deadboltwith Alarm, User Manual

14

ENGLISH

NEXIA HOME INTELLIGENCE FUNCTIONS

This lock is equipped with a 
Z-Wave radio, which allows it 
to integrate seamlessly with 
the Nexia Home Intelligence 
System. Enrolling is the 
process of adding the lock to 
your Nexia Home Intelligence 
account. To enroll the lock, 
you must 

fi

 rst have a Nexia 

Home Bridge and Nexia Home 
Intelligence account.

Function Descriptions

Enroll the Lock

Turns the Z-Wave radio on and enrolls the lock.

Verify Lock Enrollment

Veri

fi

 es that the lock is enrolled in a Z-Wave network. You do not 

need to put the Bridge into enrollment mode for veri

fi

 cation

Unenroll the Lock

Unenrolls the lock and turns the Z-Wave radio off.

The Nexia Home Bridge

To enroll the lock, you must 

fi

 rst put your Nexia 

Home Bridge into enrollment mode:

1. Install a fresh, high-quality 9V battery into the 

Bridge.

2. Hold the Bridge within 6 feet (1.8 meters) of the 

lock throughout the entire enrollment process.

3. Press and release the 

plus (+)

 button on the 

Bridge. 

4. Then perform the following functions on the lock.

To unenroll the lock, you must 

fi

 rst put your 

Nexia Home Bridge into unenrollment mode:

1. Install a fresh, high-quality 9V battery into the 

Bridge.

2. Hold the Bridge within 6 feet (1.8 meters) of the lock throughout the entire unenrollment 

process.

3. Press and release the 

minus (-)

 button on the Bridge. 

4. Then perform the following steps on the lock.

 Function Procedures

Function

Enter Programming Mode

Function Steps

Enroll the Lock

6 Digit 

Programming 

Code

OR

Blinking

The lock was 
enrolled.

The lock was 
not enrolled.

Verify Lock 
Enrollment

6 Digit 

Programming 

Code

OR

Blinking

The lock is 
enrolled.

The lock is not 

enrolled.

Unenroll the Lock

6 Digit 

Programming 

Code

OR

Blinking

The lock was 
unenrolled.

Unerollment 

failed. The lock 

is still enrolled.



For more information about Nexia Home Intelligence, 
please browse to www.nexiahome.com.



The Z-Wave radio is disabled by default to conserve 
battery life. When the lock is enrolled for the 

fi

 rst time, 

the radio is automatically enabled.



If you no longer wish to use the Nexia Home Intelligence 
system, make sure to unenroll the lock to conserve 
battery life.

+

-

Plus Button

Minus Button