P
ART
II - U
SER
MANUAL
How to maintain a PDU?
A Schleifenbauer Intelligent PDU
may not be opened by unauthorized personnel
. In the event of malfunction or faults in
the PDU, please refer to the warranty conditions. Schleifenbauer Products BV will not accept warranty claims if the PDU
has been opened or alterations have been made.
●
Please pay attention to the operation conditions before installation and operation of the Schleifenbauer PDU.
●
The Schleifenbauer PDU has to be protected according to the valid installation guidelines.
The rated value of the in-series protective device may not exceed the maximum value indicated on the product.
●
The Schleifenbauer PDU may not be used in: a humid environment, a seriously contaminated environment or
outdoors.
●
The manufacturer’s warranty on the Schleifenbauer PDU becomes invalid when the QC sticker on the side of the
profile is broken.
●
Before turning on the PDU for the first time, make sure that it has been allowed to acclimatize to the ambient
temperature for at least 24 hours. Major temperature fluctuations can lead to the formation of condensation in the
PDU if this guideline is not followed.
●
Please keep in mind that the maximum allowed temperature for a metal enclosure is 70 °C for installation in a
normal location and 90 °C for installation in a restricted access location.
How to be sure the status of switchable outlets will not change during firmware
upgrade or restarting of the controller?
The Schleifenbauer PDUs are designed for continuous operation with the power distribution and the control over
measuring and switching separated. This means that while updating or restarting the (controller of the) PDUs,
power
distribution is not interrupted
.
L
IFE
-S
UPPORTING
P
OLICY
The Schleifenbauer PDU has been designed for use in data centers where equipment has to meet very high demands
especially regarding reliability.
The Intelligent PDU however may not be applied in surroundings where a malfunction in the PDU can have consequences
for life support systems.
Life support systems include any devices designated as “critical” by the U.S. FDA. Such systems are found not only in
medical environments such as hospitals, but also on offshore platforms, in petrochemical plants, in air traffic control
centers, etc.
Page 13 of 58
V262_User manual
Schleifenbauer PDU