How to configure login profiles, usernames and passwords?
The PDU user authentication model provides five different accounts which can be used to access the web interface and
SNMPv3. In the web interface the user accounts are in decreasing order of access rights: super, admin, power, user and
viewer. It should be noted that super is only intended for use by Schleifenbauer personnel. The access rights of the
different user accounts, together with databus and unauthenticated ethernet, are shown in the table below.
The default password for each profile initially equals the username of the profile. For example the default password for the
‘admin’ user profile is “admin”. Each user can change all more restricted user passwords, in addition to their own
password. Please fill the ‘Username’ and ‘Password’ fields accordingly and then click login or press enter.
●
click < set address >
●
a new screen will appear; check if the
correct device is selected.
●
fill in the new < unit address >
●
Click < ok >
A “ write error” will occur which is correct: you just
changed the unit address so it can not be reached
anymore at its old unit address. Please click <ok>
When you perform a < rescan > you see that all
devices are correctly addressed.
Page 41 of 58
V262_User manual
Schleifenbauer PDU