C
OLORED
HOUSING
The default enclosure color of the Schleifenbauer PDUs is black. It is also possible to anodize the enclosure in five other
colors.
M
EASUREMENTS
The PDU is capable of measuring a number of quantities, either at the input, output or an optional sensor.
Measurements quantities are shown below:
01. black
02. green
03. orange
04. blue
05. red
06. yellow
Not shown but also available is enclosure color
“natural”
Note:
actual colors may vary!
Measurement
Unit
Remark
Energy
(kWh)
total & subtotal
Voltage
(V)
with voltage dip registration
Current
(A)
with peak value registration and drop detection.
Power factor
(%)
Apparent power
(VA)
Real power
(W)
Temperature
(°C)
optional sensor
Relative humidity
(%)
optional sensor
NO/NC contact
0-2
devices equipped with a USB-port can operate two NO/NC contacts
(see chapter “
How to connect a NO/NC contact
”)
Page 7 of 58
V262_User manual
Schleifenbauer PDU