P
ART
I - I
NSTALLATION
OF
HARDWARE
Please use the information in this chapter to inspect, install and connect the Schleifenbauer Intelligent PDU and all
optional mentioned accessories.
S
AFETY
WARNINGS
This manual contains important safety instructions that should be followed during installation and operation of the PDU.
Please read this manual carefully since there may be serious or fatal personal injury and damage to the equipment if the
safety instructions, warnings and directions are not complied with. Please save this document for future use.
E
XPERT
PERSONNEL
Installation, maintenance and inspection of the Schleifenbauer Intelligent PDU must be carried out by adequately trained
persons according to NEN EN 50110-1, with full observance of the specifications of NEN EN 50110-1 and NEN 3140.
T
ECHNICAL
INSTALLATION
REQUIREMENTS
Before installing and using the system, check whether the characteristics of the electrical system to which connection is to
be made correspond to the product specifications.
●
The Schleifenbauer Intelligent PDU has been designed for connection to electrical systems that comply with IEC
60364 or in the Netherlands, NEN 1010.
●
The voltage, maximum permitted current and the number of phases must be correct. This information is
displayed on the front side of the PDU.
●
The maximum permitted power must be taken into account with regard to the maximum length and the diameter
of the connecting lead.
●
The values and characteristics of the in-series protective devices must match the PDU and the protective
elements included in it.
●
The environmental factors must correspond to the product specifications.
V
ISUAL
INSPECTION
After opening the cardboard box and removing the packaging material, the PDU should be checked visually. The PDU
should not be put into operation if damage is detected in a way that safe and proper operation cannot be guaranteed. In
such cases, please contact Schleifenbauer Products BV. Note that, in the case of PDUs that are equipped with an
overvoltage protection, the overvoltage protection and the respective overcurrent protection (if applicable) must be
inspected on a regular basis.
The PDU must be installed in a restricted access location
Socket-outlet must be installed near the equipment
Socket-outlet must be easily accessible
Installation by expert personnel only
After installation: default passwords / RC4 keys
MUST
Part III - Administrator manual
Page 8 of 58
V262_User manual
Schleifenbauer PDU