T
ESTING
Each Schleifenbauer PDU is individually tested according to the NEN 3140 standard. Test reports are available on request.
C
LEANING
The PDU may only be cleaned by wiping off the outside with a clean dry cloth.
C
ONTENTS
OF
THE
PACKAGE
The Schleifenbauer Intelligent PDUs are shipped in a cardboard box. Where applicable, dispose the packaging material in a
responsible manner, in accordance with local regulations. All of the materials used for packaging can be recycled.
Immediately after receipt, check whether you have received your order in a complete and undamaged state.
The following items are delivered for each PDU:
●
fixing materials: these can be attached to the PDU (19’’ or table-mounting brackets), or are delivered separately if
they have been ordered separately;
●
the installation manual (one per shipment);
Please note that the PDU User Manual can also be found online at
A
DDITIONALLY
NEEDED
TOOLS
FOR
INSTALLATION
The following tools are needed to install the PDUs:
●
cage-nuts with bolts and washers
●
suitable screwdriver.
M
OUNTING
THE
PDU
IN
CABINETS
How to mount a PDU horizontally (19 inch)?
Each 19’’ rack bracket of a PDU has holes for horizontal mounting in 19” racks. The holes are
positioned so that an appropriate fixing hole is always available for a PDU with a profile height of
1.5 U. Using one or two of the four holes allows mounting without wasting space.
For measurement of insulation resistance, the measuring voltage used must be lower than or equal to the
voltage according to the product specification.
Page 9 of 58
V262_User manual
Schleifenbauer PDU