How to read measurements of optional sensors and what options are possible?
Option 1: load page
Sensors are displayed on the "Load" screen whenever there are less than three sensors in use. When adding more sensors,
one or more pages are added to the display to show the sensor readouts (see image):
Option 2: sensor pages
The sensor measurements are displayed in the following format:
< channel number > < sensor type > = < value >
The sensor type is indicated by a letter. The letters are abbreviations for the sensor type as follows:
DS = status of NO/NC contact [ O = open; C = closed ]
Te = temperature
[degrees C]
RH = relative humidity
[%]
Example: sensor page 1 of 2
Example: sensor page 2 of 2
Analog
:
T =
temperature
[°C]
H =
humidity
[%]
R = residual current
[mA]
See “How to read branch residual current measurements”
A =
AC residual current
[mA]
D = DC residual current
[mA]
B = Branch residual current [mA]
Digital
:
I =
dry switch contact
S =
error status
Y =
activity
Page 17 of 58
V262_User manual
Schleifenbauer PDU