11. Maintenance / maintenance schedule
68|108
Reference Manual |Edition 4.0 (10-2013) |EcoCut 3300
2» Disconnect the power (1) and data cables (2)
from both motors.
2
1
3» Turn the machine to the side of the wire
entry. Place on a soft pad.
4» Remove both screws of the transport motor
(3) and then both side screws of the cutter
motor (4).
3
4
5» Put the machine back to its normal position.
6» Remove the motors and the motor holders.
Notice:
Replace the complete cutter motor includ-
ing motor holder and pulley.
7» Loosen the four screws and detach the trans-
port motor with pulley from the motor holder.
8» Screw on the new motor with pulley to the
motor holder.
9» Turn the machine to the side of the wire
entry.
10» Screw on both motors with the screws (3) and
(4) slightly.
11» Press motor in the direction of the arrow to
tension the belts. Tighten the screws.
3
4
12» Put the machine back to its normal position.
13» Connect the motor cables (1) and (2).
14» Close the housing of the machine.
Summary of Contents for EcoCut 3300
