2 Safety
Operating Instructions | Version 1.0 (05-2018) | Uni-M Ferrule
10 | 32
Qualified personnel
Due to product-specific training, technical skill and work experience, these individuals are qualified to put the
product into operation and to instruct the operating personnel.
Operating personnel
Personnel who have been trained and authorized by the management to operate the product safely according
to the instructions. They have the ability to identify all sorts of danger and to avoid it. This includes an ade-
quate knowledge of accident prevention and first aid procedures.
Third party
External personnel called in by the operating company, service technicians and staff from
Schleuniger
.
2.8
PERSONAL PROTECTIVE EQUIPMENT
While working on the product, always wear protective equipment according to the local regulations to mini-
mize the risk of injury.
2.8.1
Eye protection
To protect the eyes from small particles produced during crimping of wire/cable.
2.8.2
Safety shoes
To protect from heavy, falling objects or reels.
2.9
SAFETY INSTALLATIONS
This product should be used only in presses with proper security and protection measures. The built in safety
interlocks on the machine (safety, protection, monitoring) must not be removed, by-passed or changed. The
safety circuits should be checked periodically. Defective safety equipment must be repaired immediately be-
fore work may be continued.
■
Never in a machine without the safety shield installed and properly functioning.
■
Never operate in a machine if the safety cover is open.
■
The press emergency stop buttons must always be accessible.
■
Do not remove any safety barriers installed on the press.
