1 General
Operating Instructions | Version 1.0 (05-2018) | Uni-M Ferrule
6 | 32
1
GENERAL
Thank you for your trust in the
Schleuniger
technique! You have acquired a high performance
Schleuniger
prod-
uct, designed and manufactured in our factory to your needs. Read through this manual with due care and at-
tention. It contains important tips and safety instructions, which allow precise and reliable wire/cable produc-
tion.
1.1
MANUFACTURER
The original equipment manufacturer of the applicator is Mecal s.r.l. of Fubine, Italy. However, this applicator
is sold and serviced by Schleuniger Inc., U.S.A. In this manual,
Schleuniger
Inc., U.S.A. is referred to as the
manufacturer and abbreviated with
„Schleuniger“
.
Schleuniger Inc.
Phone: +1 (603) 668-8117
87 Colin Drive
Fax: +1 (603) 668-8119
Manchester, NH 03103
Email:
"Mailto:TSInbox@schleuniger.com"
USA
Web:
"http://www.schleuniger.com"
1.2
MANUFACTURING DATE / PRODUCT TYPE
See
“EG-Declaration of Conformity (Register 2)“
in the manual.
1.3
INFORMATION ABOUT THE OPERATOR'S HANDBOOK
1.3.1
Contents of the manual
General
Each person using the product must be properly trained and have read and understood the Operator's Hand-
book. This is also imperative, even when the respective person has operated such a product or similar previ-
ously and where they have been trained by the manufacturer.
The Operator's Handbook is no longer valid, if any of its contents (except a Quick Start Card, where available)
are removed or are changed on the data storage medium.
As Operator's Handbook we declare:
Construction
We are trying to make the operation of our products as easy as possible. To achieve this we have developed a
concept for the Operator's Handbook. Since errors can never fully be avoided despite diligence, we are always
grateful for any advice and suggestions.
■
This manual is part of the product and contains all the relevant information necessary to operate the prod-
uct efficiently and safely as intended.
■
The following phases of the product life cycle are described:
o
Shipping
o
Commissioning
o
Operation
o
Maintenance
o
Disposal
■
Observe the safety regulations and instructions. The local accident preventions and safety regulations
must be followed.
■
If the product changes hands, the manual must be supplied to the new owner.
■
Published modifications and corrections from the manufacturer must be complemented. Ask your local
Schleuniger distributor.
