OPERATOR‘S MANUAL
3
NT2 rondo
Version: 27211 - F
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
1
General
1.1
Guarantee notice
If the instructions contained in this operator’s manual are not observed then any
claims under guarantee shall be void.
1.2
General
All parts coming into contact with media are designed for water quality to DIN 19643.
This counter-current swimming system is of state-of-the-art technology.
This manual does not take into account local regulations, the observance of which is the
responsibility of the operator – also on behalf of installation personnel that may be invol-
ved.
The type plate specifies the machine series, the frame size, the most important operating
data and the serial number. Please be sure to quote it in case you require more information
and also when placing subsequent orders or ordering spare parts.
1.3
Usage Instructions
The counter-current system was designed for use in private swimming pools. Consequent-
ly it must not be installed in public swimming pools. Neither the entire unit nor parts thereof
must be used in other systems. You are expressly directed to use it only in accordance with
these instructions.
The counter-current system must not be operated beyond the parameters stated in the
technical data (3.1)
. In case of doubt, please contact your customer service or the manu-
facturer.
2
Safety Instructions
2.1
General
•
Prior to starting up, make sure that the operators have read and understood the
operator’s manual. Not the operator but the owner is responsible for safety!
•
Make sure that the relevant safety regulations and laws are observed in the operating
company and / or country where the counter-current systems are to be used.
•
All parts that come into contact with the medium are resistant to an absolute salt con-
tent of up to 0.75% (4,500 mg/l Cl¯). If the salt concentrations are greater than this, the
manufacturer must be consulted.
•
Use the counter-current system only if it is in perfect technical condition, in accordance
with the regulations, observing safety requirements and danger conditions and strictly
adhering to all the instructions in the operator’s manual!
•
Promptly remedy any faults that could influence safety.
For more details of safety instructions please see the operator´s manual
WK (27220).
