Description of Functions
EN-US · 30.30.01.01963 · 00 · 05/19
29 / 52
Designation
Display parameter
Description
Counter 1
[
Cc1
]
Counter for suction cycles (suction signal input)
Counter 2
[
Cc2
]
Counter for the “suction valve” switching fre-
quency
Calling up the counter values
ü
Select the counter you wish to see in the system menu.
4
Confirm your selection of counter 1 [
cc1
] or counter 2 [
cc2
] using the
button.
ð
The first three decimal places of the counter total will be displayed (the digits x 10
6
). This corre-
sponds to the three-digit block with the highest value.
Use the
button to display the remaining decimal places of the counter total, in order of descending
value. The decimal points show which 3-digit block of the counter total is shown in the display.
The counter total is comprised of the 3-digit blocks taken together:
Displayed section
10
6
10
3
10
0
Digit block
0.48
61.8
593
The current counter total in this example is 48 618 593.
Non-erasable counter readings are saved only every 1000 steps. That means that when the op-
erating voltage is switched off, up to 999 steps of the counter are lost.
6.10 Displaying the software version
The software version indicates the software currently running on the internal controller.
ü
The Info menu is open.
1. Use the
button to select the [
5oc
] parameter.
2. Confirm using the
button.
ð
The software ID is displayed.
4
To exit the function, press the
button.
6.11 Displaying the part number
The part number of the ejector is printed on the label and also stored electronically.
ü
The ejector is in the Info menu.
1. Use the
button to select the part number parameter
Art
.
2. Use the
button to confirm the part number parameter
Art
.
ð
The first two digits of the part number are displayed.
3. Press the
button again several times.
ð
The remaining digits of the part number are displayed. The decimal points shown are part of the
part number.
In the first block displayed, the point on the far right (after the second digit), which is part of
the part number, is not displayed for technical reasons.
