Important Information
EN-US · 30.30.01.02237 · 00 · 04/20
7 / 94
The type plate (2) contains the following data:
•
Manufacturer’s address
•
CE label
•
ETL mark with control number
1)
•
Applied UL and CSA standards
•
Voltage range
•
Permitted pressure range
•
Manufacturing date
•
Serial number
1)
Not for the version with an IO-Link master module
1.4 Warnings in This Document
Warnings warn against hazards that may occur when handling the product. This document contains three
levels of danger that you can recognize by the signal word.
Signal word
Meaning
WARNING
Indicates a medium-risk hazard that could result in death or serious injury if
not avoided.
CAUTION
Indicates a low-risk hazard that could result in minor or moderate injury if not
avoided.
NOTE
Indicates a danger that leads to property damage.
1.5 Symbol
This symbol indicates useful and important information.
ü
This symbol represents a prerequisite that must be met prior to an operational step.
4
This symbol represents an action to be performed.
ð
This symbol represents the result of an action.
Actions that consist of more than one step are numbered:
1. First action to be performed.
2. Second action to be performed.
1.6 Trademark
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH,
Germany.
PROFINET® is a registered trademark of PROFIBUS and PROFINET International (PI).
EtherNet/IP is a trademark of ODVA, Inc.
IO-Link conforms to IEC 61131-9:2013, which specifies single-drop digital communication interface tech-
nology for small sensors and actuators (SDCI) (commonly known as IO-Link).
