STORAGE
30.30.01.00176/01
www.schmalz.com
EN | 43
7 Storage
If the tube lifter is not used for an extended period, it must be stored correctly to protect it from
damage.
Options for correct storage:
1. Leave the lift tube attached to the operator handle.
2. Take down the tube lifter. Remove the suction cup and store it separately from the lift tube
and operator handle.
ATTENTION
Incorrect storage of the tube lifter
Damage to the suction plates
►
The effects of ozone, light (especially UV), heat, oxygen, humidity as well as
mechanical influences can reduce the service life of rubber products.
You must store rubber parts such as suction cups and suction plates in a cool
place (0° C to +15° C, max. 25° C) that is dark, dry, low in dust and offers
protection from the weather, ozone and drafts. They should also be free of
tension (e.g. stacked appropriately to avoid deformation).
