SAFETY INSTRUCTIONS
30.30.01.00176/01
www.schmalz.com
EN | 9
1.5.2 Fundamental safety instructions
WARNING
Ignoring the general safety guidelines
Personal injury / damage to plants/systems
►
►
►
►
►
Carry out mounting or removal only when the device is disconnected from the
power supply and depressurized.
Before working on the tube lifter, ensure that the crane cannot move.
Personnel and animals are not permitted to sit or stand in the danger zone.
Only use the tube lifter for its intended use (chapter 1.6).
Do not pick up liquids or bulk materials.
You are also responsible for third parties in the working area of the tube lifter. For this reason, the
responsibilities for the various tasks to be carried out on the tube lifter must be clearly defined and
observed. The competency of those responsible must be assured.
WARNING
Ignoring the general safety guidelines
Personal injury / damage to plants/systems
►
►
►
►
All safety features must be in proper working order.
Safety features must not be altered or disabled.
The tube lifter must be in perfect working order and must have the necessary
specifications for the particular load.
The tube lifter must be operated only in the original condition as delivered. The
manufacturer assumes no liability for consequences of modifications over
which it has no control, in particular, replacement of original parts with parts
from other sources.
You must adhere to the legal regulations and safety regulations applicable at the
location of use when using the tube lifter.
1.6 Intended use
The Vakuum Tube Lifter JumboSprint EX Ejektor
(referred to below as the “tube lifter”) is used to lift
and transport loads in combination with a crane system or jib crane.
The tube lifter is intended only for commercial use. The order confirmation defines the specific use of
the tube lifter.
The tube lifter is classified as follows according to ATEX directive 2014/34 EU:
II 2G c IIB T6
II 2D c T85°C
