schmersal AES 9107, Operating Instructions Manual

EN

Operating instructions            pages 1 to 6

Original

AES 9107

Operating instructions

Safety-monitoring module

EN

1

1.  About this document

1.1  Function

This operating instructions manual provides all the information you 

need for the mounting, set-up and commissioning for the safe operation 

and disassembly of the safety-monitoring module The operating 

instructions must be available in a legible condition and a complete 

version in the vicinity of the device

1.2  Target group: authorised qualified personnel

All operations described in this operating instructions manual must 

be carried out by trained specialist personnel, authorised by the plant 

operator only

Please make sure that you have read and understood these operating 

instructions and that you know all applicable legislations regarding 

occupational safety and accident prevention prior to installation and 

putting the component into operation

The machine builder must carefully select the harmonised standards 

to be complied with as well as other technical specifications for the 

selection, mounting and integration of the components

1.3  Explanation of the symbols used

Information, hint, note:

This symbol is used for identifying useful additional information

Caution:

 Failure to comply with this warning notice could 

lead to failures or malfunctions

Warning:

 Failure to comply with this warning notice could 

lead to physical injury and/or damage to the machine

1.4  Appropriate use

The products described here were developed to perform safety-related 

functions as part of an entire plant or as part of a locking mechanism 

of an elevator It is the responsibility of the manufacturer of a plant to 

ensure the correct functionality of the entire machine or plant

The safety-monitoring module must be exclusively used in accordance 

with the versions listed below or for the applications authorised by the 

manufacturer Detailed information regarding the range of applications 

can be found in the chapter "Product description"

1.5  General safety instructions

The user must observe the safety instructions in this operating 

instructions manual, the country-specific installation standards as well 

as all prevailing safety regulations and accident prevention rules

Further technical information can be found in the Schmersal 

catalogues or in the online catalogue on the Internet:  

wwwschmersalnet

The information contained in this operating instructions manual is 

provided without liability and is subject to technical modifications

There are no residual risks, provided that the safety instructions as well 

as the instructions regarding mounting, commissioning, operation and 

maintenance are observed

Content

x

000 / 1

1

2016 / v

A

   -   101

153415-EN / G / 2016-1

1-04 / 

AE-Nr

 6710

1  About this document

11  Function                                              1

12 

Target group: authorised qualified personnel

                 1

13  Explanation of the symbols used                           1

14  Appropriate use                                         1

15  General safety instructions                                1

16  Warning about misuse                                   2

17  Exclusion of liability                                      2

2  Product description

21  Ordering code                                          2

22  Destination and use                                     2

23  Technical data                                          2

24 

Safety classification

                                    2

3  Mounting

31  General mounting instructions                             2

32  Dimensions                                            2

4  Electrical connection

41  General information for electrical connection                 2

42  Wiring example                                         3

43  Printed circuit board top view                             3

5  Operating principle and settings

51  Operating principle after the operating voltage is switched on     3

52  Check of the error detection                              3

6  Set-up and maintenance

61  Functional testing                                      4

62  Maintenance                                           4

7  Disassembly and disposal

71  Disassembly                                          4

72  Disposal                                              4

8  EU Declaration of conformity