F
The solenoid interlock can be used as an end stop. Dependant upon the door weight and the actuating
speed, the mechanical life could be reduced.
Mounting of the solenoid interlock and the actuator
Refer to the mounting instructions manual for the corresponding actuator.
2
The actuator must be permanently fitted to the safety guards and protected against displacement by
suitable measures (tamperproof screws, gluing, drilling of the screw heads).
Actuating directions
The diagrams show a closed guard system with a set latching force of 50 N (see also chapter "adjustment of
latching force").
2
Provide for a sufficient insertion of the actuator into the rotary handle.
Correct
False
