EFAS CAM-Creator
DOC_MAN_MEC_EFAS-CAM_#SEN_#AIN_#V1
Seite 37 von 56
Version: 2018 / 02
NOTE
Press Enter to confirm your entries
Any change you make to your program sequence table will have to be confirmed by pressing
Enter or by moving on to another field. Only then will the Save icon (Disc) appear.
A general recommendation is to press Enter every time you enter a value into the table.
6.4.3
Track Masks (Control/Track-Masks)
To mask tracks
You may use a module's digital inputs to disable (mask) any of the tracks. In other words, if the
digital inputs "DI" have been allocated appropriately (see first column), the tracks whose boxes
are ticked will be actuated by the cam program.
Example: In the picture below, all cams will be disabled when DI 0.0 detects a high signal. You must also
enable the "Track Masks" mode. See chapter 6.4.4.6 Track Masks.
Tick the appropriate boxes.
And enable the option as descirbed in section 6.4.4.6 Track Masks.
